AL 2O3 is a base material that is used in many application fields of technical ceramics. Good mechanical properties at high temperatures, good conductivity.
AL2O3 is among other things
processed to bushings of measuring instruments and clocks, as well as to abrasives.
Industrial Ceramics can be calculated only manuel
AL2O3 is often used in jewelry, clock, or measurement industry.
AL2O3 is produced in the procedure of FCP. FCP means almost ceramic production and is a variation of the SLA process with subsequent refining through burning.
The procedure:
Your model is broken down into layers of 0.2 mm on the computer.
They are sent to the printer. The printer put a 0.2 mm thick layer of a ceramic resin mixture. This mixture hardens now in places where your part is to be created, by a UV laser.
This process repeatedly until the component is created.
Now your part is burned, it escapes the resin and compressed the component.
In the end result is a dense ceramic material which is even medically useful.
Shipping Cost
on request
Tolerance
n/a
Minimum wall thickness
0,2
Smallest detail
0,05
Maximum dimension
coming soon
We offer unfortunately no Priority service for ceramic
Price
---
Post-production services will be updated soon. High gloss polishing and staining on request.
Available colors:
White, more coming soon
Unit | Value | ||
---|---|---|---|
Flexural strength | g/cm³ | 51 | |
Compressive strength | MPa | 2500 | |
Fracture toughness | MPan1/2 | 4 | |
Thermal resistance | °C | 2072°C | |
Impact resistance | kJ/m² | n/a | |
E-Modul | GPa | 350 | |
Water absorption | % | 0 | |
Chemical resistance | Very resistant | ||
weather | Resistant |