The mineral, which is composed of natural magnesium silicate, iron and aluminium. Good temperature resistance, good thermal conductivity.
Industrial Ceramics can be calculated only manuel
As a raw material for technical ceramic, Cordierite is made mostly synthetic. Cordierite foam is a refractory ceramic with low thermal conductivity and expansion. It is used if a high temperature insulation in large and frequent temperature fluctuations is required.
Cordierite is made in the procedure of FCP. FCP means almost ceramic production and is a variation of the SLA process with subsequent refining through burning.
The procedure:
Your model is broken down into layers of 0.2 mm on the computer.
They are sent to the printer. The printer put a 0.2 mm thick layer of a ceramic resin mixture. This mixture hardens now in places where your part is to be created, by a UV laser.
This process is repeated until the component is created.
Now your part is burned, it escapes the resin and compressed the component.
Now your part is burned, it escapes the resin and compressed the component.
Shipping within
on request
Tolerance
n/a
Minimum wall thickness
0,2
Smallest Detail
0,05
Maximum dimension
coming soon
We offer unfortunately no Priority service for ceramic
Price
---
Post-production services will be updated soon. High gloss polishing and staining on request.
Available colors
White;, more coming soon
| Unit | Value | ||
|---|---|---|---|
| Flexural strength | g/cm³ | 2,6 | |
| Compressive strength | MPa | n/a | |
| Fracture toughness | MPan1/2 | n/a | |
| Thermal resistance | °C | n/a | |
| Impact resistance | kJ/m² | n/a | |
| E-Modul | GPa | n/a | |
| Water absorption | % | 0 | |
| Chemical resistance | very resistant | ||
| Weather | Resistant | ||